Exabyte 221L, Руководство по эксплуатации продукта

Страница: 85 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 69
P
ERFORMING
H
ARDWARE
E
XERCISES
4.
4. 4.
4. Remove the cartridge.
5.
5. 5.
5. Replace the cartridge magazine.
6.
6. 6.
6. Close the library’s door and re-enable security, if desired.
P
ERFORMING
H
ARDWARE
E
XERCISES
This section describes hardware exercises you can perform from the operator
panel to test library functions. Hardware exercises are available from the
Demo Menu and the Command Menu. The Demo Menu provides options for
running the library in a continuous demo mode, where the robot randomly
moves cartridges between slots. The Command Menu provides options for
performing specific robot movements.
Note: You can also perform hardware exercises through the library’s Remote
Management utility and through the Console interface program. For
information about the Remote Management utility, see Chapter 6 . For
information about Console, see page 143 .
U
SING
E
LEMENT
I
NDEXES
Elements are the physical locations in the library that can accept a cartridge (the
robot, the magazine slots, the fixed slots, the entry/exit port, and the tape drives).
Each element has an element index that enables the library to identify it. Many
operator panel functions require you to specify element indexes. For example,
to move a cartridge, you must specify the source and destination element
indexes. The source is the location from which the robot will pick the cartridge.
The destination is where the robot will place the cartridge.
Figure 4-9 shows the element indexes for the library.
Figure 4-9 Library element index assignments
83 82
7 6 5 4 3 2 1 81
86
Fixed Cartridge Slots
Magazine 2 Magazine 1
Tape Drives
Robot
E/E Port
14 13 12 11 10 9 8
15 16 17 18 19 20 21