Exabyte 221L, Руководство по эксплуатации продукта

Страница: 44 / 208

28
P
RODUCT
M
ANUAL
1014258
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Viewing the Status Screen
During normal operation, the Status screen appears on the LCD (see the
example below). You can use this screen to monitor library activities. By
default, the Status screen displays the current operating status of the library
and tape drive(s). If two drives are installed, the second line continuously
cycles through status messages for Drive 1 and Drive 2.
Note: Drive 1 is the tape drive closest to the fixed cartridge slots; Drive 2 is
located directly to the right of Drive 1.
If a hardware error occurs, an error code appears on the Status screen. Refer to
Chapter 8 for help in diagnosing and correcting errors. You must correct the
error before operation can continue.
Using the Operator Panel Keys
Use the operator keys described in Table 3-1 to perform the following actions:
O
VERVIEW OF
L
IBRARY
M
ENUS
To access the library’s menus, press
[MENU]
on the keypad. The first menu to
appear is “Cartridge Inventory.” Press the up and down arrow keys to loop
through the menu options.
E x a b y t e 2 2 1 L
1 R e a d y - N o T a p e
Table 3-1 Operator key descriptions
Key Action
(Arrow keys)
Move up, down, left, or right through the menus and screens.
[ESCAPE]
Return to the previous menu or screen, or cancel an
operation without saving changes.
[ENTER]
Select the item next to the screen arrow or accept a change.
[STATUS]
Display the Status screen, which shows library status, tape
drive status, and operator messages.
[MENU]
Display a menu of options for configuring the library, viewing
information screens, and issuing commands to the library.
[UNLOCK{DOOR]
Stop robot operations and release the door’s interlock
mechanism. The door can then be opened manually.
[RESET]
Reset the library and tape drive(s).