Exabyte 221L, Руководство по эксплуатации продукта

Страница: 66 / 208

50
P
RODUCT
M
ANUAL
1014258
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Enabling Security from the Operator Panel (LCD Security)
To enable LCD security:
1.
1. 1.
1. Press
[MENU]
to display the menus (or return to the top of the menu
selections). Press the down arrow key until “Security” appears. This screen
shows whether security is currently enabled or disabled.
2. 2. 2. 2. Press
[ENTER]
. An informational message appears, then the following screen
appears.
3. 3. 3. 3. Use the left and right arrow keys to move across the columns. Use the up
and down arrow keys to select a number. When you have selected a
password, press
[ENTER]
. A prompt similar to the one below appears.
4.
4. 4.
4. Press
[ENTER]
to accept the new password. The Security screen then displays
“LCD Password.”
Note: Once enabled, security remains in effect through resets and power cycles.
Disabling Security from the Operator Panel
To disable LCD security:
1. 1. 1. 1. Press
[MENU]
to display the menus (or return to the top of the menu
selections). Press the down arrow key until “Security” appears. If security is
enabled, “LCD Password” appears on this screen.
Note: Security may have been enabled by your application using a SCSI
command (the LCD will display “SCSI”). If this is the case, security
must be disabled by your application.
S e c u r i t y
D i s a b l e d
P a s s w o r d ? 0 0 0
↕
P a s s w o r d : 0 0 0
A c c e p t ?
S e c u r i t y
L C D P a s s w o r d