Exabyte 221L, Руководство по эксплуатации продукта

Страница: 140 / 208

124
P
RODUCT
M
ANUAL
1014258
C
HAPTER
6—U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
I
SSUING
L
IBRARY AND
T
APE
D
RIVE
C
OMMANDS
From the Remote Management utility, you can issue individual commands to
the library and tape drive(s), run demos, perform diagnostic tests, calibrate the
library, and reset the library and tape drive(s).
The commands are available from the Maintenance page. Click on
Maintenance at the top of the page to view the Maintenance page. Figure 6-35
shows the Maintenance page.
From the Maintenance page, you can make the following selections:
Run the library in demo mode – Set options for running the library in a
continuous demo mode, where the robot randomly moves cartridges
between slots.
Run individual library commands – Issue commands to run the library’s
self test, position the robot to specific locations, scan bar code labels, and
move cartridges.
Perform library diagnostic tests – Test individual library functions.
Run individual tape drive commands – Issue commands to clean a tape
drive and unload a cartridge from a tape drive.
Calibrate library elements – Calibrate components in the library.
Reset the library and/or tape drive(s) – Reset the library and tape drive(s) or
an individual tape drive.
R
UNNING
L
IBRARY
D
EMOS
To run a library demo:
1. 1. 1. 1. Set the library’s control mode to Remote (see page 92 ).
2. 2. 2. 2. Click on Maintenance at the top of the page.
Figure 6-35 Remote management utility – Maintenance page