❏
Power cord
❏
Interface cables
❏
Loaded paper
❏
Installed optional paper cassette units
c
Important:
When moving the printer, always keep it horizontal and avoid subjecting it to shocks.
When lifting the printer to move it
Separate the printer and the optional paper cassette unit.
c
Important:
Unlock the fixture on the back of the printer to separate the printer and the optional paper cassette unit. If you lift
the printer without unlocking the fixture, the fixture may be damaged and the optional paper cassette unit may fall.
When moving the printer on casters
Unlock the stopper for the casters. Avoid steps when moving the printer to prevent it from being subjected to
shocks.
Related Information
&
“Installing the Paper Cassette Units to the Printer” on page 152
&
“Installing the Face up Tray” on page 157
Transporting the Printer
When you need to transport the printer, follow the steps below to pack it. The printer should be packed in the same
status as when it was purchased to prevent it from being subjected to vibrations or shocks.
1.
Turn off the printer by pressing the
P
button and then unplug the power cord.
2.
Remove all of the paper from the printer.
3.
Disconnect all cables such as USB cables and remove installed options such as paper cassette units.
See the steps for installing options and remove them in reverse order.
4.
Pack the printer in its box, using the protective materials.
c
Important:
To avoid condensation after transporting the printer from a cool to a warm environment, allow the printer to warm
up to room temperature before use.
Related Information
&
“Installing the Paper Cassette Units to the Printer” on page 152
>
Moving and Transporting the Printer
>
105