Error Messages
Solutions
Maintenance Roller in XX is nearing the end
of its service life.
The maintenance rollers need to be replaced periodically. Paper is not fed
correctly from the paper cassette when it is time for replacement. Contact
Epson support or an authorized Epson service provider to request
replacement of the maintenance rollers.
Maintenance roller in the XX is at the end of
its service life. For details, see your
documentation.
Contact Epson support or an authorized Epson service provider to request
replacement of the maintenance rollers for the paper cassette.
Toner Cartridge is at the end of its service
life.
Replace Waste Toner Collector first, then
Toner Cartridge.
Replace with a new toner cartridge and waste toner collector. If the error
message is still displayed, make sure that the waste toner collector is
inserted until it locks into place.
Recovery Mode
Update Firmware
The printer has started in recovery mode because the firmware update
failed. Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable. (During recovery
mode, you cannot update the firmware over a network connection.)
2. Visit your local Epson website for further instructions.
It is Time to Replace Consumables
Precautions when Handling Consumables
Always observe the following handling precautions when replacing consumables or maintenance parts.
!
Warning:
Be sure to read the handling precautions linked below as well as the following precautions.
“Handling the Consumable Products and Maintenance Parts” on page 18
!
Caution:
When replacing consumables, make sure you protect your surroundings by laying down sheets of paper to prevent
toner from getting on your surroundings or clothes.
c
Important:
This product is designed to provide the best print quality when using genuine toner. Other products not
manufactured by Epson may cause damage or reduce print quality that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Epson shall not be liable for any damages or
problems arising from the use of consumable products not manufactured or approved by Epson.
Note:
Store consumables under the following conditions.
❏
Store consumables out of direct sunlight. Store them as they were packed at the time of purchase in a location that is not
subject to condensation and within a temperature of 0 to 35°C and a humidity of 15 to 80%.
❏
Do not store consumables standing on their ends or tilting.
>
It is Time to Replace Consumables
>
Precautions when Handling Consumables
126