Epson/Seiko SRC-320 ABS, Руководство пользователя

Страница: 81 / 176

Functions 10. Options
67
12) Restoring files
Return the files that you backed up earlier to the controller. See SPEL Editor or
SPEL for Windows manual for details.
10.4 Additional RS-232C board
Two channels of RS-232C are on one board. Install the RS-232C simply by plugging the
board into an option slot. (Refer to “10.1 Option types and board current consumption” in
this chapter.) The board has DIP switch SD1 and jumper pin XP1. These have been
correctly set at the factory, so please do not change them.
The addresses of the additional RS-232C are #22/#23. Connector pin assignments and
compatible connector are the same as those for #20/#21. See “8. RS-232C” in this vol-
ume for details.
The additional addresses, #22/#23, are for general communications. You cannot use the
CONSOLE command to specify them as the console in AUTO mode.
Please use either #20 or #21 when you want to make the RS-232C the console.
For your reference, settings of DIP switch SD1 and jumper pin SP1 are shown
DIP switch SD1 : All bits off
Jumper pins XP1-A to H : see the table below
Number Setting
XP1-A Jump 2 and 3
XP1-B Jump 2 and 3
XP1-C Jump 2 and 3
XP1-D Jump 2 and 3
XP1-E Jump 2 and 3
XP1-F Open
XP1-G Open
XP1-H Open