Endress+Hauser Prothermo NMT532, Руководство по эксплуатации

Страница: 56 / 72

Operation Prothermo NMT532
56 Hauser
Code Display Details
11 #5 element open
12 #5 element short
13 #6 element open
14 #6 element short
23 #0 element over range
24 Memory defect (ROM)
29 Element exposed (liquid level below #1 element position)
41 Memory defect (RAM)
42 Memory defect (EEROM)
Code Display Details
VH81 Temperature Unit
(Temperature unit) Item type Selection
Default °C
Selection °C, °F, K
Screen used to select the temperature display unit.
Based on the HART configuration, °C (HART code: 32), °F (HART code:
33), and K (HART code: 35) are available.

Leave this parameter in °C if you are changing the default °C in
the host gauge (NMS8x, NMR8x, NRF81, NMS5, NMS7,
NRF590, TMD1) to another unit.
VH82 Element Number
(Number of
temperature
measurement
elements) Item type Read / Write
Default 2
Range 1 to 16
The number of available temperature measurement elements is
entered. This function is mainly used with the NMT532.

Do not change the default parameter on the NMT532. The
number of elements is predetermined by the customer. Changing
the default parameter may cause erroneous calculations or
unnecessary error displays.
L
CAUTION
Changing the parameters:
Do not change the default parameter on the NMT532. The number of
elements is predetermined by the customer.
‣
Changing the default parameter may cause erroneous calculations
or unnecessary error displays.
VH83 No. of Preambles
(Number of
preambles) Item type Read / Write
Default 5
Range 2 to 20
Sets the number of preambles for HART communication.
L
CAUTION
Changing the value:
Do not change the default value.
‣
This may cause erroneous calculations or unnecessary error
displays.
VH84 Distance Unit
(Distance unit) Item type Selection
Default mm
Selection ft., m, inch, mm