Endress+Hauser Prothermo NMT532, Руководство по эксплуатации

Страница: 16 / 72

Incoming acceptance and product identification Prothermo NMT532
16 Hauser
PROTHERMO NMT532
Supply circuit; Ui < 30 V li < 120 mA Pi < 1 W
Ci = 6.6 nF Li = 48 µH
Warning:
- Don’t modify parts and circuits of this instrument.
- Avoid electrostatic charge at the plastic surface.
Hauser Yamanashi Co., Ltd
Yamanashi 406-0846
Made in Japan
NP-2556-3
0044
Type 4X
1
Ambient temperature: -40 °C
～
2
C : IS Cl. I, Div. 1, Gp. C,D T*
IS Cl. I, Zone 0, Ex ia IIB T* Ga
US: IS Cl. I, Div. 1, Gp. C,D T*
Cl. I, Zone 0, AEx ia IIB T* Ga
NI Cl. I, Div. 2, Gp. C,D T*
C :FM17CA0088
US:FM17US0168
T* = T
Install per control drawing
C: Ex462-875-2
US: Ex461-852-2
PROTHERMO NMT532
Circuit d'alimentation; Ui < 30 V li < 120 mA Pi < 1 W
Ci = 6.6 nF Li = 48 µH
Warning:
- Ne modifiez pas les pièces et les circuits de cet instrument.
Évitez la charge électrostatique sur la surface plastique.
Hauser Yamanashi Co., Ltd
Yamanashi 406-0846
Made in Japan
NP-2732
0044
Type 4X
1
Température ambiante: -40 °C
～
2
C : IS Cl. I, Div. 1, Gp. C,D T*
IS Cl. I, Zone 0, Ex ia IIB T* Ga
US: IS Cl. I, Div. 1, Gp. C,D T*
Cl. I, Zone 0, AEx ia IIB T* Ga
NI Cl. I, Div. 2, Gp. C,D T*
C :FM17CA0088
US:FM17US0168
T* = T
Installation par dessin de contrôle
C: Ex462-875-2
US: Ex461-852-2
A B
A0038591
 7 FM C/US approval nameplate
A FM C/US for English
B FM C/US for France
1 Range of measurement temperature
2 Maximum ambient temperature
4.3 Manufacturer contact address
Hauser Yamanashi Co., Ltd.
862-1
Mitsukunugi, Sakaigawa, Fuefuki, Yamanashi, Japan
Address of the manufacturing plant: See nameplate.
4.4 Storage and transport
4.4.1 Storage conditions
• Storage temperature: –40 to +85 °C (–40 to 185 °F)
• Store the device in its original packaging.
4.4.2 Transport
NOTICE
The housing may become damaged or dislodged.
Risk of injury
‣
Transport the device to the measuring point in its original packaging or hold by the
process connection.
‣
Do not fasten lifting devices (hoisting slings, lifting eyes etc.) at the housing; instead,
secure it to the process connection. Take into account the center of gravity of the device
in order to avoid unintended tilting.
‣
Comply with the safety instructions, transport conditions for devices over 18 kg (39.6
lbs) (IEC61010).