Endress+Hauser Prothermo NMT532, Руководство по эксплуатации

Страница: 26 / 72

Installation Prothermo NMT532
26 Hauser
3. Put the tensioning wire [4] through the anchor weight hook [5] twice and also tie the
other end to the bottom hook [3].
4. Wind the provided wire [1] around both ties of the hooks to secure the tensioning
wire.
5. Using the bolts, fix the mounting flange of NMT532 to the nozzle at the top of the
tank.
This completes the mounting anchor weight procedure.
2
3
4
5
1
1
5
2
3
4
A B
A0038601
 18 Anchor weight attachment
A Anchor weight (high profile)
B Anchor weight (low profile)
1 Provided wire
2 Flexible tube
3 Bottom hook
4 Tensioning wire
5 Anchor weight hook
5.5.4 Mounting on floating roof tank
There are three methods of mounting NMT532 on a floating roof tank as follows.
• Top anchor method
• Thermo well method
• Guide wire ring method
If a heating coil is attached to the bottom of the tank, the clearance between the
bottom hook of the flexible tube and the bottom of the tank may vary depending on
the type of heating coil.