Endress+Hauser Proline t-mass 65 PROFIBUS DP, Руководство по эксплуатации

Страница: 41 / 106

Proline t-mass 65 PROFIBUS DP Operation
41
5.5 Operating options
For the complete operation of the measuring device, including device-specific parameters, there
are device drivers available to the user to provide the following operating programs:
5.5.1 Operating program “ToF Tool - Fieldtool Package”
Modular software package consisting of the service program “ToF Tool” for configuration and
diagnosis of ToF level measuring devices (time-of-flight measurement) and evolution of pressure
measuring instruments as well as the “Fieldtool” service program for the configuration and diagnosis
of Proline flow measuring devices. The Proline flowmeters are accessed via service protocol resp.
via the service interface FXA 193.
Contents of the “ToF Tool - Fieldtool Package”:
• Commissioning, maintenance analysis
• Configuring flowmeters
• Service functions
• Visualization of process data
• Trouble-shooting
• Reading out the verification data and updating the software of the “Fieldcheck” flow simulator
5.5.2 Operating program “FieldCare”
FieldCare is Hauser’s FDT-based plant Asset Management Tool and allows the
configuration and diagnosis of intelligent field devices. By using status information, you also have a
simple but effective tool for monitoring devices. The Proline flowmeters are accessed via the service
interface FXA 193.
5.5.3 Operating program “SIMATIC PDM” (Siemens)
SIMATIC PDM is a standardized, manufacturer-independent tool for the operation, configuration,
maintenance and diagnosis of intelligent field devices.