Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 75 / 126

Proline Cubemass C 100 HART Commissioning
Hauser 75
Parameter Description Selection / User entry Factory setting
Decimal places 3 Select the number of decimal places for the
display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Value 4 display Select the measured value that is shown on
the local display. Picklist (see 1st display value) None
Decimal places 4 Select the number of decimal places for the
display value. • x
• x.x
• x.xx
• x.xxx
• x.xxxx x.xx
Display language Set display language. • English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык (Russian)
• Svenska
• Türkçe
•
中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• ةّيبَرَعْلا (Arabic)
• Bahasa Indonesia
•
ภาษาไทย (Thai)
• tiếng Việt (Vietnamese)
• čeština (Czech)
English (alternatively, the
ordered language is preset in
the device)
Display interval Set time measured values are shown on
display if display alternates between values. 1 to 10 s 5 s
Display damping Set display reaction time to fluctuations in
the measured value. 0.0 to 999.9 s 0.0 s
Header Select header contents on local display. • Device tag
• Free text Device tag
Header text Enter display header text. ------------
Separator Select decimal separator for displaying
numerical values. • .
• , .
Backlight Switch the local display backlight on and off. • Disable
• Enable
Enable
10.4 Simulation
The "Simulation" submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).
Navigation
"Diagnostics" menu → Simulation
Simulation → Assign simulation process variable
Value process variable
Simulation current output