Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 77 / 126

Proline Cubemass C 100 HART Commissioning
Hauser 77
Parameter Prerequisite Description Selection / User
entry
Factory setting
Pulse value 1 The Down-count. val. option
is selected in the Simulation
pulse output parameter.
Enter the number of pulses for
simulation. 0 to 65 535 0
Switch output simulation 1 – Switch simulation of switch
output on and off. • Off
• On Off
Switch status 1 The On option is selected in
the Switch output simulation
parameter.
Select the status of the status
output for the simulation. • Open
• Closed Open
Simulation device alarm – Switch the device alarm on and
off. • Off
• On Off
Simulation diagnostic event – Switch simulation of the
diagnostic event on and off.
For the simulation, you can
choose from the diagnostic
events of the category selected
in the
Diagnostic event
category parameter.
• Off
• Picklist
Diagnostic events
(depends on the
selected category)
Off
10.5 Protecting settings from unauthorized access
The following options exist for protecting the configuration of the measuring device from
unintentional modification after commissioning:
• Write protection via access code for Web browser →  77
• Write protection via write protection switch →  78
10.5.1 Write protection via access code
With the customer-specific access code, access to the measuring device via the Web
browser is protected, as are the parameters for the measuring device configuration.
Navigation
"Setup" menu → Advanced setup → Administration → Define access code
Structure of the submenu
Define access code → Define access code
Confirm access code
Defining the access code via the Web browser
1. Navigate to the Enter access code parameter.
2. Define a max. 4-digit numeric code as an access code.
3. Enter the access code again to confirm the code.
 The Web browser switches to the login page.
If no action is performed for 10 minutes, the Web browser automatically returns to
the login page.
The user role with which the user is currently logged on via the Web browser is
indicated by the Access status tooling parameter. Navigation path: Operation →
Access status tooling