Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 72 / 126

Commissioning Proline Cubemass C 100 HART
72 Hauser
Parameter overview with brief description
Parameter Description Selection / User interface Factory setting
Installation direction Set sign of flow direction to match the
direction of the arrow on the sensor. • Flow in arrow direction
• Flow against arrow direction Flow in arrow direction
Zero point adjustment control Start zero point adjustment. • Cancel
• Busy
• Zero point adjust failure
• Start Cancel
Progress Shows the progress of the process. 0 to 100 % 0 %
10.3.3 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizers can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
Totalizer 1 to n
→
Assign process variable
Unit totalizer
Failure mode
Parameter overview with brief description
Parameter Description Selection Factory setting
Assign process variable Select process variable for totalizer. • Off
• Volume flow
• Mass flow
• Corrected volume flow
• Target mass flow
• Carrier mass flow Mass flow
Unit totalizer Select process variable totalizer unit. Unit choose list kg
Totalizer operation mode Select totalizer calculation mode. • Net flow total
• Forward flow total
• Reverse flow total Net flow total
Failure mode Define totalizer behavior in alarm condition. • Stop
• Actual value
• Last valid value
Stop