Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 69 / 126

Proline Cubemass C 100 HART Commissioning
Hauser 69
10.2.10 Configuring the partial filled pipe detection
The Partially filled pipe detection submenu contains parameters that have to be set for
configuring empty pipe detection.
Navigation
"Setup" menu → Partially filled pipe detection
Partially filled pipe detection → Assign process variable
Low value partial filled pipe detection
High value partial filled pipe detection
Response time part. filled pipe detect.
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign process variable – Select process variable for
partially filled pipe detection. • Off
• Density
• Reference density Off
Low value partial filled pipe
detection One of the following options is
selected in the
Assign process
variable parameter:
• Density
• Reference density
Enter lower limit value for
deactivating partialy filled pipe
detection. Signed floating-point
number Country-dependent:
• 0.2 kg/l
• 12.5 lb/ft³
High value partial filled pipe
detection One of the following options is
selected in the
Assign process
variable parameter:
• Density
• Reference density
Enter upper limit value for
deactivating partialy filled pipe
detection. Signed floating-point
number Country-dependent:
• 6 kg/l
• 374.6 lb/ft³
Response time part. filled pipe
detect. One of the following options is
selected in the
Assign process
variable parameter:
• Density
• Reference density
Enter time before diagnostic
message is displayed for
partially filled pipe detection. 0 to 100 s 1 s