Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 76 / 126

Commissioning Proline Cubemass C 100 HART
76 Hauser
Value current output
Frequency simulation
Frequency value
Pulse simulation
Pulse value
Switch output simulation
Switch status
Simulation device alarm
Simulation diagnostic event
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign simulation process variable – Select a process variable for
the simulation process that is
activated. • Off
• Mass flow
• Volume flow
• Corrected volume
flow
• Density
• Reference density
• Temperature
• Dynamic viscosity
• Kinematic viscosity
• Temp.
compensated
dynamic viscosity
• Temp.
compensated
kinematic viscosity
• Concentration
• Target mass flow
• Carrier mass flow
Off
Value process variable A process variable is selected
in the
Assign simulation
process variable parameter.
Enter the simulation value for
the selected process variable. Signed floating-point
number 0
Simulation current output 1 – Switch simulation of the
current output on and off. • Off
• On Off
Value current output 1 The On option is selected in
the Current output
simulation parameter.
Enter the current value for
simulation. 3.59 · 10 -3 to 22.5 · 1
0 -3 mA
3.59 mA
Frequency simulation 1 – Switch simulation of the
frequency output on and off. • Off
• On Off
Frequency value 1 The On option is selected in
the Frequency output
simulation parameter.
Enter the frequency value for
simulation. 0.0 to 12 500.0 Hz 0.0 Hz
Pulse simulation 1 The Down-count. val. option
is selected in the Simulation
pulse output parameter.
Switch simulation of the pulse
output on and off.

If the Fixed value option
is selected, the Pulse
width parameter defines
the pulse width of the
pulses output.
• Off
• Fixed value
• Down-counting
value
Off