Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 53 / 126

Proline Cubemass C 100 HART Commissioning
Hauser 53
10 Commissioning
10.1 Function check
Before commissioning the device, make sure that the post-installation and post-
connection checks have been performed.
• "Post-installation check" checklist →  25
• "Post-connection check" checklist →  33
10.2 Configuring the measuring device
The Setup menu with its submenus contains all the parameters needed for standard
operation.
Structure of the "Setup" menu
Setup → Select medium →  56
Current output 1 →  57
Pulse/frequency/switch output
→  59
Output conditioning →  65
Low flow cut off →  68
Partially filled pipe detection →  69
HART input →  64
Advanced setup
→  70
10.2.1 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a
unique designation using the Device tag parameter and thus change the factory setting.
The number of characters displayed depends on the characters used.
For information on the tag name in the "FieldCare" operating tool →  46
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /). Promass
10.2.2 Setting the system units
In the System units submenu the units of all the measured values can be set.