Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 106 / 126

Technical data Proline Cubemass C 100 HART
106 Hauser
16.6 Performance characteristics
Reference operating
conditions
• Error limits based on ISO 11631
• Water with +15 to +45 °C (+59 to +113 °F) at2 to 6 bar (29 to 87 psi)
• Specifications as per calibration protocol
• Accuracy based on accredited calibration rigs that are traced to ISO 17025.
To obtain measured errors, use the Applicator sizing tool →  99
Maximum measured error o.r. = of reading; 1 g/cm³ = 1 kg/l; T = medium temperature
Base accuracy
Design fundamentals →  109
Mass flow and volume flow (liquids)
±0.10 % o.r.
Mass flow (gases)
±0.50 % o.r.
Density (liquids)
Under reference conditions Standard density calibration
1)
Wide-range
Density specification
2) 3)
[g/cm³] [g/cm³] [g/cm³]
±0.0005 ±0.02 ±0.002
1) Valid over the entire temperature and density range
2) Valid range for special density calibration: 0 to 2 g/cm³, +5 to +80 °C (+41 to +176 °F)
3) Order code for "Application package", option EE "Special density"
Temperature
±0.5 °C ± 0.005 · T °C (±0.9 °F ± 0.003 · (T – 32) °F)
Zero point stability
DN Zero point stability
[mm] [in] [kg/h] [lb/min]
1 ¹⁄₂₄ 0.0008 0.00003
2 ¹⁄₁₂ 0.002 0.00007
4 ¹⁄₈ 0.014 0.0005
6 ¹⁄₄ 0.02 0.0007
Flow values
Flow values as turndown parameter depending on nominal diameter.