Endress+Hauser Proline Cubemass C 100 HART, Руководство по эксплуатации

Страница: 81 / 126

Proline Cubemass C 100 HART Operation
Hauser 81
Pulse output 1
Output frequency 1
Switch status 1
Parameter overview with brief description
Parameter Description User interface Factory setting
Output current 1 Displays the current value currently
calculated for the current output. 3.59 to 22.5 mA 3.59 mA
Measured current 1 Displays the current value currently
measured for the current output. 0 to 30 mA 0 mA
Pulse output 1 Displays the value currently measured for
the pulse output. Positive floating-point number 0 Hz
Output frequency 1 Displays the value currently measured for
the frequency output. 0.0 to 12 500.0 Hz 0.0 Hz
Switch status 1 Displays the current switch output status. • Open
• Closed Open
11.3 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using the Setup menu →  53
• Advanced settings using the Advanced setup submenu →  70
11.4 Performing a totalizer reset
In the Operation submenu the totalizers are reset:
• Control Totalizer
• Reset all totalizers
Function scope of "Control Totalizer " parameter
Options Description
Totalize The totalizer is started.
Stop Totalizing is stopped.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
hold The totaling process is stopped and the totalizer is set to its defined start value
from the
Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
totalize The totalizer is set to the defined start value in Preset value parameterand the
totaling process is restarted.
Function scope of "Reset all totalizers" parameter
Options Description
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.