Endress+Hauser Cerabar M, Руководство по эксплуатации

Страница: 13 / 92

Cerabar M, Deltapilot M Incoming acceptance and product identification
Hauser 13
3.3.2 Stainless steel housing, hygienic
002757-A
p
Order code:
Ext. order code:
Ser. no.:
MWP
D-79689 Maulburg
Made in Germany,
ex works FW
U=
Dev.Rev.:
L=
Span
Mat.:
002758-C
1
2
3
4
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
12
A0030021
1 Device name
2 Order code (for re-orders)
3 Serial number (for identification)
4 Extended order code (complete)
5 Nominal measuring range
6 MWP (Maximum working pressure)
7 Length data
8 Electronic version (output signal)
9 Supply voltage
10 Min./max. span
11 Wetted materials
12 Approval-specific information
13 ID number of notified body with regard to ATEX (optional)
14 ID number of notified body with regard to Pressure Equipment Directive (optional)
15 Approvals
16 Software version
17 Device version
18 Degree of protection
Devices with certificates are fitted with an additional plate.
002759-B
1
1
A0030024
1 Approval-specific information
3.4 Identifying the sensor type
In the case of gauge pressure sensors, the "Pos. zero adjust" parameter appears in the oper-
ating menu ("Setup" -> "Pos. zero adjust").
In the case of absolute pressure sensors, the "Calib. offset" parameter appears in the oper-
ating menu ("Setup" -> "Calib. offset").
3.5 Storage and transport
3.5.1 Storage conditions
Use original packaging.
Store the measuring device in clean and dry conditions and protect from damage caused by
shocks (EN 837-2).