Run and operation explanation for inverter
18
Fig.4-7 Waiting status parameter display operating example
(2) Function code parameter setting
Take function code F01.01 modified from 5.00Hz to 6.00Hz as example.Boldface in Fig.4-8
shows flickering digit.
Fig.4-8 Example for parameter setting and modification
Description: under second -class menu: if the parameter has no blinking digit, this function
code can’t be modified, possible reasons are as follows:
1) This function code shouldn’t be modified: for example actual detected status parameter:
run record parameter etc;
2) This function code can’t be modified under run status and can be changed after stopping
running;
3) Parameter protected. All the function code can’t be modified when function code F00.14=1
or 2
，
in order to avoid wrong operation. Need to set the function code F00.14 to 0 if you want to
edit function code parameter.
(3) See about failure parameter under failure status
：
If press key under failure status the user can quickly locate to the F26 group function
code parameter. Press can quickly switch value between F26.04 ~ F26.10 parameters and
fault alarm, easy to view the fault records.
(4) Keypad key-press locking operation
Under monitoring situation, To press for 5s,the keyboard will display ‘LOCH1’
，
now
the buttons on the keyboard are under locked. The detailed locked situation is decided by the value
LED displayed content
1s
1s
0.00
C-01
Key-press operation
order
Para.
C-02
Para.
C-03
1s
Para.
C-05
1s
Para.
∫…∫
C-00
0.00
F0
0.
00
F0
1.
00
F01.0
0
F01.0
1
005.0
0
Key-press
peration order
Enter into
editing Status
display first-class
menu
Choose
F01 group
function code
Move to the
position to
be adjusted
Choose
function
code F01.01
Exit editing
status
Store modified
value: back to
first -class menu
Display next
function code
LED displayed
content
00
5
.00
F01.0
2
00
6
.00
Function code
confirmation,
Enter into
second-class
Parameter
modification,
Choose
parameter digit
Parameter
modification,
5
→
6
…
…
ENC
