ENC EN600PV Series, Руководство пользователя

Страница: 14 / 91

Installation and wiring
11
X5 Multifunction input 5 max input frequency: 1KHz
X6 Multifunction input 6
X7 Multifunction input 7
X8/DI
Multifunction input
8/high-speed pulse input
Except for X1
～
X7 function, It can be used as
hi-speed pulse input.
Input impedance: 2.2K
Ω
max input frequency: 50KHz
Power source
+24V +24V power source
P24V power to external device
（
24±4V
）
Max output current: 200mA
PW
External power source
input
factory default connect to +24V ； when use
external signal to drive X terminal, It need to
connect to external power source and cut off with
+24V power terminal.
+10V +10V power source
P10Vpower to external device (10±0.5V)
Max output current:50mA
COM Common interface
Reference ground for digital signal and +24V
power
GND Common interface
Reference ground for analog signal and +10V
power
Analog input
AI1 Analog output 1
Input range ： DC 0V ～ 10V/4 ～ 20Ma, selected
by
SW1 dial switch on control board.
Input impedance
：
voltage input at 20K Ω
；
current input at 250 Ω .
resolution: 1/4000
AI2 Analog output 2
Input range: DC-10V ～ 10V/4 ～ 20mA ， selected
by the second figure of F00.20 and SW2 dial
switch on control board.
Input impedance: voltage input at 20K
Ω
；
Current input at 250 Ω . Resolution: 1/2000
Analog
output
AO1 Analog output 1
Voltage or current output is selected by SW3
(AO1) and SW4(AO2)dial switch on control
board.
Output voltage range: 0
～
10V
Output current range: 4 ～ 20mA
AO2 Analog output 2
Multifunction
output
terminal
Y1 Open circuit collector output 1
Opto coupler isolation output
，
unipolar Open
circuit collector output
Max voltage output: 30V
Max current output: 50mA
Y2 Open circuit collector output 2
Y3 Open circuit collector output 3
Y4/DO
Open circuit collector
output 4/
High-speed impulse
output
Function code F00.22 to select terminal output
mode When Open circuit collector output, with
the same spec as terminal Y.
When High-speed impulse output
，
the max
frequency is 20KHz.
RLY1
output
TB—TC Normal closedterminal
Contact capacity ： AC250V/2A （ cos φ =1 ）
AC250V/1A
（
cos φ =0.4
）
DC30V/1A
TA—TC Normal open terminal
Communi
cation
interface
485+
485 differential
signal interface
485 differential signal positive terminal
485- 485 differential signal negative terminal
ENC