Run and operation explanation for inverter
14
Fig.4-2 Keypad layout sketch
4.2.2 Keypad function description
There are 9 key-presses on inverter keypad, And function definition of each key is as shown
in Table 4-1.
Table 4-1 keypad function table
Key
Name
Function description
Program/Exit key
Enter into or exit programming state
Shift/Supervision
key
Can choose modification digit of set data under editor state
；
can switch display status supervision parameter under other state
Function/Data key Enter into or exit programming state
Rev/Jog key
Under keypad mode: to press this key can set reverse run or Jog run
according to the 1
st
bit of parameter F00.15
Run key
Enter into forward run under keypad mode
Stop/reset key
In common run status the inverter will be stopped according to set mode after
pressing this key if run command channel is set as keypad stop effective mode.
The inverter will be reset and resume normal stop status after pressing this key
when the inverter is in malfunction status.
Digital
potentiometer
It is the same as the function of increase and decrease key
，
rotate to the left
means decrease
，
rotate to the right means increase.
Increasing button
To increase data or function code (to press it continuously can improve
increasing speed)
模式指示灯
变频器故障报警指示灯
显示电流指示单位（A）
显示频率指示单位（Hz）
显示电压指示单位（V）
变频器正转指示灯
变频器反转指示灯
编程/退出键
移位/监控键
反转/点动键
递增键
数字电位器
确认/数据键
递减键
停止/复位键
正转运行键
Current indicator light
Failure alarm indicator light
Mode indicator light
Voltage indicator light
Frequency indicator light
Forward run indicator light
Reverse run indicator light
Digital potentiometer
Confirm/Data key
Decrease key
Stop/Reset key
Forward run key
Increase key
Exit/Program key
Shift/Supervision key
Reverse/Jog key
ENC
