Elkron FAP54, Руководство по программированию

Страница: 94 / 152

94 FAP54 Programming
[1] LED ACTIVE
[2] FREQUENT BLINKING
[3] THRESHOLD 1
[4] THRESHOLD 2

LED ACTIVE
[1] # YES
[2] NO
[5] DIP SWITCH 1

[6] DIP SWITCH 2
[7] DIP SWITCH 3
[8] DEFAULT
FREQUENT BLINKING
[1] # YES
[2] NO
THRESHOLD 1 (mA): XX.Y
THRESHOLD 2 (mA): XX.Y
3.7.3.10 Configure current input module 4-20 mA (CI)
The configuration menu of the current input module 4-20 mA is shown below:
Press key
1 to define the device LED operation:
To enable the LED blinking which signals communication between the control panel and the device, press 1 .
The active option is signalled by # symbol. To disable the LED blinking press 2 .
With OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 2 to define the module frequent blinking operation.
To enable the module LED frequent blinking, press
1 .
To disable it, press 2 .
The active option is signalled by # symbol.
With
OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 3 to assign a value to the alarm threshold 1 of the device:
Insert the integer part of the alarm threshold (in mA), then move the cursor on the decimal digit by pressing the
>
key and finally insert the decimal part of the threshold.
Press
OK to confirm the inserted value. By pressing ESC , you go back to the previous menu without modifying the
current value.
Press key 4 to assign a value to the alarm threshold 2 of the device:
Insert the integer part of the alarm threshold (in mA), then move the cursor on the decimal digit by pressing the
>
key and finally insert the decimal part of the threshold.
Press
OK to confirm the inserted value. By pressing ESC , you go back to the previous menu without modifying the
current value.