104
FAP54 Programming
PANEL ID: 00000
[1] INSERT SLAVE
[2] DELETE
[3] INCLUDE/EXCLUDE
[4] VERIFY
PANEL CONFIGURED AS SLAVE
SLAVE ADDRESS:___
SLAVE ADDRESS: XXX
NAME:___
SLAVE ADDRESS: XXX
NAME: XXXXXXXXXXXX
EXTINGUISHMENT: [1] YES [2] # NO
3.8.2.2 PANEL ID
Through this function it is possible to assign to the control panel an ID consisting of 5 digits (after entering it, confirm
with
OK
):
The control panel ID is used to distinguish a control panel inside a network of control panels
3.8.2.3 Master / Slave
With FAP54 control panels it is possible to create a network of control panels. Inside this network, one control panel is
a MASTER and all the others are SLAVE. A MASTER control panel can control up to 32 SLAVE control panels. Each
SLAVE control panel is an independent entity, but supervised by the MASTER control panel which groups and
communicates locally a set of events occurred on a SLAVE control panel.
To create a MASTER/SLAVE network, each control panel must be equipped with an optional RS232/RS485 board.
To access the menu item MASTER/SLAVE, it is necessary that the control panel is programmed as MASTER (see
paragraph 3.8.4 Control Panel
).
If the control panel has been programmed as SLAVE, there is nothing to be configured and the access to the
MASTER/SLAVE menu will lead to the following message:
Instead, if the control panel has been programmed as MASTER, the access to the MASTER/SLAVE menu will lead to
the following menu display:
INSERT SLAVE
Through this menu it is possible to insert the SLAVE control panels to be controlled by the MASTER control panel.
Enter the address of the SLAVE control panel to be controlled and confirm with
OK
:
Then enter the name to be assigned to the SLAVE control panel to be controlled and confirm with
OK
.
Then, the user is required to specify whether the slave control panel is equipped for fire extinction management or not
(the # symbol indicates the option currently selected):
Содержание FAP54
Страница 151: ...FAP54 Programming 151 ...
