Elkron FAP54, Руководство по программированию

Страница: 62 / 152

62 FAP54 Programming
GROUP:
GROUP: XXX
NAME: XXXXX
ZONE:
GROUP: XXX
NAME: XXXXX
ZONE: XXX
NAME: XXXXXXXXXXX
GROUP: XXX
NAME: XXXXX
ZONE: XXX
CONFIRMED XX/50
GROUP: XXX
NAME: XXXXX
ZONE: XXX
DELETED XX/50
GROUP: XXX
NAME: XXXXX
ZONE: XXX
CONFIGURATION COMPLETE
GROUP: XXX
GROUP: XXX
NAME: XXXXX
CIRCUIT:
3.3.2.2 Associate zone to group
Enter the group number and then press OK to confirm:
Now enter the number of the zone to be associated and confirm with OK :
The name associated with the zone will be displayed:
By pressing
OK , the zone is associated with the group (if it was not already associated) and the success of the
operation is notified to the user through the following message:
Instead, if the zone is already associated with the group, it is possible to cancel the association by pressing < key.
Also in this case a confirmation message will be displayed:
A group of zones can contain up to 50 zones. If you try to insert other zones, the following message will be displayed:
3.3.2.3 Associate output module to group
Enter the group number and then press OK to confirm:
Now enter the number of the circuit where the output module to be associated to the group is located and press OK .