Elkron FAP54, Руководство по программированию

Страница: 59 / 152

FAP54 Programming 59
[OK] STORE CONFIGURATION
[ESC] EXIT WITHOUT STORING
GROUP:
GROUP: XX
[1] # INCLUDED
[2] EXCLUDED
GROUP:
GROUP: XXX
NAME: XXXXX
CIRCUIT: XX DEVICE: XXX TI.: XX YY/50

NAME: XXXXX

GROUP: XXX
NAME: XXXXX
NO ASSOCIATED DEVICE
After confirming with OK the last configuration menu for the selected mode and type, the user will be asked whether
to confirm the set configuration:
By pressing OK , the configuration set with the previous menu screens will be stored.
By pressing ESC , the procedure is concluded without storing.
In both cases, after the user has made his choice, the system will return directly to the initial menu for the group
number entry.
3.3.1.5 Include/Exclude group
Enter the number of the group to be included or excluded and then press OK to confirm:
The following message will be displayed:
The user can choose whether to include or exclude the group.
Selection must be confirmed with
OK .
Press ESC to return to the previous menu.
The exclusion of a group of devices is signalled by the control panel LEDs and it is shown on the display and stored in
the event log. Also, the programmable relay is activated immediately if is programmed as exclusion relay.
3.3.1.6 Verify
Enter the number of the group to be verified and then press OK to confirm:
If the group is empty, the following message will be displayed:
If the group includes at least one device, the following screen will be displayed with all the devices associated with the
selected group which can be viewed by pressing keys

and

.
The coordinates, type and name are shown for each device. The number of devices associated with the group is also
indicated (YY/50).
By pressing the OK key in the device screen view it is possible to view the output modules associated with the group.