Elkron FAP54 страница 26 Скачать руководство пользователя

Страница: 26 / 152

FAP54 Programming

[1] CONFIGURE ALL THE CIRCUITS
[2] CONFIGURE SINGLE CIRCUIT
[3] MANUAL CIRCUIT CONFIGURATION
[4] INCLUDE/EXCLUDE



[5] VERIFY



[6] DELETE ALL THE ASSOCIATIONS
[7] DELETE EXPIRED ASSOCIATIONS

[8] EVENT LOG

CIRCUIT 1:    OPEN
CIRCUIT 2:    LOOP
CIRCUIT 3:    ------
CIRCUIT 4:    FAULTY



CIRCUIT 5: EXCLUDED



CIRCUIT 6:    OPEN
CIRCUIT 7:    ------
CIRCUIT 8:    ------



[1] AUTO-ADDRESSED MODE

[2] PRE-CONFIGURED MODE

[3] UPDATE

3.1 CIRCUIT

You can access this menu by pressing key 1 on the main programming menu:

Through keys



and



you can move from one section to the other.

The line initialization menu includes the following options:

[1] CONFIGURE ALL THE CIRCUITS

Use this option to initialize all the circuits connected with the control panel at the same time.

[2] CONFIGURE SINGLE CIRCUIT

Use this option to initialize a single circuit in open or loop mode.

[3] MANUAL CIRCUIT CONFIGURATION

Use this option to enter the hardware configuration manually (open/loop) and all the devices on the detection line.

[4] INCLUDE/EXCLUDE

Use this option to include/exclude a circuit.

[5] VERIFY

Use this option to check the configuration and composition of each single circuit. This option can also be used to
check the operation of each single device on the selected circuit.

[6] DELETE ALL THE ASSOCIATIONS

Use this option to cancel all the tables of the existing associations in the system.

[7] DELETE EXPIRED ASSOCIATIONS

Use this option to cancel only the associations which are no longer valid.

[8] EVENT LOG

Use this option to read the log of the local events.

3.1.1 Configure all the circuits

The user can select the configuration of each circuit separately (loop or open).
Keys



and



are used to the select the circuit, while keys

and

are used to select the initialization method.

The latter can be selected only for present and working modules (neither faulty nor excluded)

Possible modules not present will be indicated with dashes.

After selecting the configuration of each circuit, press

to pass to the selection of the addressing mode:

Содержание FAP54

























































































































































Результаты поиска

Содержание FAP54

Отзывы:

Похожие инструкции для FAP54

Бренды по названию

Популярные бренды

Elkron FAP54, Руководство по программированию

Результаты поиска

Содержание FAP54

Отзывы:

Похожие инструкции для FAP54

Бренды по названию

Популярные бренды