Elkron FAP54, Руководство по программированию

Страница: 60 / 152

60 FAP54 Programming
GROUP: XXX
NAME: XXXXX
NO ASSOCIATED OUTPUT MODULE
GROUP: XXX INCLUDED
OPERATIVE MODE: FIRE ALARM
MULTIPLE KNOCK W/DELAY
GROUP: XXX
NAME: XXXXX
CIRCUIT: XX OUTPUT MOD.: XXX YY/50

NAME: Name of the output module

DETECTOR DELAY: 1
MANUAL CALL POINT DELAY: 2
WEIGHT: 2
GENERAL ALARM: NO
If there are no output modules associated with the group, the following message will be displayed:
If at least one output module is associated with the group, the following screen will be displayed where the user can
scroll the module list through keys

and

.
The coordinates and name are shown for each module. The number of modules associated with the group is also
indicated
(YY/50).
By pressing OK you will pass from the devices screen view to that of the output modules associated with the group.
By pressing ESC in one of the previous screens it is possible to return to the menu for the group number entry.
By pressing > in one of the screen views of the associated devices or output modules, the current group settings will
be displayed:
By pressing the > key again, the current settings of the parameters related to the programmed mode will be shown.
For example, if the group is programmed in fire alarm and in multiple knock w/delay mode, the following screen will be
displayed:
By pressing > again, the panel goes back to the initial screen showing the devices associated to the group.
To go back to the previous menu, press ESC.