Elkron FAP54, Руководство по программированию

Страница: 149 / 152

FAP54 Programming 149
7.15 APPENDIX 15 – PS2 KEYBOARD MAPPING
The table below shows the list of the PS2 keys used and their mapping with the correspondent keys in the internal
keypad.
PS2 key Function
ESC ESC
F1 RESET
F2 SILENCE REARM SIREN
F3 INCREASE DELAY
F4 SKIP DELAY
F5 INCLUDE EXCLUDE
F6 MASTER ALARM
F7 MENU
F8 ACK
ENTER OK
DEL Char cancellation (equivalent to LEFT arrow)
Directional keys (UP, DOWN, LEFT, RIGHT) Directional keys (UP, DOWN, LEFT, RIGHT)
- (numerical keypad) Decrease LCD sharpness ( * on the internal keyboard)
+ (numerical keypad) Increase LCD sharpness ( 0 on the internal keyboard)
SHIFT Enable uppercase letters
CAPS LOCK Permanently enable upper case letters
7.16 APPENDIX 16 – ERROR CODES FOR CIRCUIT FAULT (COMM. ERROR)
The table below reports the error codes relevant to the circuit fault notified with the following message:
FAULT CIRCUIT XX
COMM. ERR. YYY DZZZ
Where:
XX
= circuit number
YY
= error code (see the table below)
ZZZ
= address of the device
Code Meaning
1 Lack of communication with a device in alarm.
2 Lack of communication with a device in external fault.
3 Lack of communication with a device in alarm or external fault.
4 At least one device with address 241 has been detected during the monitoring phase.
5
At least one device with address greater than 128 and in alarm condition has been detected during
the monitoring phase.
6
At least one device with address greater than 128 and in fault/external fault condition has been
detected during the monitoring phase.
7
At least one device with address greater than 128 and power supplied again because of a short circuit
has been detected during the monitoring phase.