Elkron FAP54, Руководство по программированию

Страница: 88 / 152

88 FAP54 Programming
REPETITION ACTIVE
[1] # YES
[2] NO
LED ACTIVE
[1] # YES
[2] NO
[5] RESET OUTPUT

[6] RESET TIME
[7] DEFAULT
FREQUENT BLINKING
[1] # YES
[2] NO
[1] LED ACTIVE
[2] REPETITION ACTIVE
[3] FREQUENT BLINKING
[4] LOCAL RESET

LOCAL RESET
[1] # LOCAL RESET DISABLED
[2] LOCAL RESET ENABLED
RESET OUTPUT
[1] # RESET OUTPUT DISABLED
[2] RESET OUTPUT ENABLED
3.7.3.5 Configure pulsed input module (PI)
The pulsed input module configuration menu is the following:
Press key
1 to define the device LED operation.
To enable the LED blinking which signals communication between the control panel and the device, press
1 .
The active option is signalled by # symbol. To disable the LED blinking press 2 .
With OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 2 to define the module alarm repetition output operation.
To enable the module alarm repetition output, press 1 .
To disable the alarm repetition output at the LED blinking press 2 .
The active option is signalled by # symbol.
With
OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 3 to define the module frequent blinking operation.
To enable the module LED frequent blinking, press 1 .
To disable it, press 2 .
The active option is signalled by # symbol.
With
OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 4 to enable or disable the local reset input:
Press 1 to disable the module local reset input.
Press 2 to enable the module local reset input.
With OK you confirm selection. With ESC you go back to the previous menu without changing the current state.
Press key 5 to enable or disable the reset output:
Press
1 to disable the module reset output.
Press 2 to enable the module reset output.
With OK you confirm selection. With ESC you go back to the previous menu without changing the current state.