Eaton XN-GW Series, Руководство пользователя

Страница: 38 / 206

4 Technical features
4.5 Address setting
38
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
Table 5:
Meaning of the
DIP-switches Designation Function
2
0
- 2
7
Address-switch for setting the last byte of the gateway’s IP-address,
only if the "MODE" switch is set to "OFF" (see Table 6: Combinations
for the address-switch settings, Page 38).
MODE Depending on its setting, this switch changes the function of address-
switches 2
0
- 2
7
(see Table 6: Combinations for the address-switch
settings, Page 38).
CFG Switching from "OFF" to "ON" activates the storage of the station
configuration (see Chapter 4.6 Storing the station configuration,
Page 47).
Note
The position of the DIP-switches 2
7
, CFG and MODE is also important for the down-
load of new firmware to the gateway. Please read Chapter 7.7 Firmware download,
Page 183.
Table 6:
Combinations
for the address-
switch settings Address switch
2
0
- 2
7
Address switch
"MODE" Function
0 OFF Setting the „Default-settings for the gateway”.
1-254 OFF „Manual address allocation via DIP-switches 20 to
27” (Setting the last byte of the gateway’s IP-
address)
1 ON Gateway-„Address setting via DHCP-mode”
2 ON Gateway-„Address setting via BootP-mode”
4 ON Gateway-„Address setting via PGM-mode”
8 ON Gateway-„Address setting via PGM-DHCP-mode”