Eaton XN-GW Series, Руководство пользователя

Страница: 148 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
148
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
122
(7Ah) Param_error_
report_control G/S BYTE Bit 0 - Field -Slave error-
0: Single diagnostics is activated
1: Single diagnostics is not activated
Bit 1 - Group error -Slave error-
0: Group diagnostics is activated
1: Group diagnostics is not activated
Bit 2 - Field -PKZ error-
0: Single diagnostics is activated
1: Single diagnostics is not activated
Bit 3 - Group error -PKZ error-
0: Group diagnostics is activated
1: Group diagnostics is not activated
Bit 4 - Field -Configuration error-
0: Single diagnostics is activated
1: Single diagnostics is not activated
Bit 5 - Group error -Configuration error-
0: Group diagnostics is activated
1: Group diagnostics is not activated
122
(7Ah) Param_error_
report_control G/S BYTE Bit 6 - Error message -U
AUX
-
0: Error message U
AUXERR
activated
1: Error message U
AUXERR
not activated
Bit 7: reserved
124
(7Ch) reserved /
Lifeguarding time
(Lifeguarding
time only up
to version
VN 01-03)
G/S USINT 02
hex
-FF
hex
Default: 64
hex
Disconnect: FF
hex
Setting of lifeguarding time, timeout time
up to automatic reset of the slaves in the
event of communication failure. (n × 10 ms)
(Default 1 s)
125
(7Dh) Process_data_
slave_diag G/S WORD Input bit communication error, slave x
0: Slave diagnostics message from Byte 1 /
Bit 7 is accepted in the feedback interface
as Bit 4
1: Slave diagnostics message from Byte 1 /
Bit 7 is not accepted in the feedback inter-
face as Bit 4
126
(7Eh),
127
(7Fh) reserved
Table 61:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description