Eaton XN-GW Series, Руководство пользователя

Страница: 75 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
75
5.3 VSC-Vendor Specific Classes
In addition to supporting the above named CIP Standard Classes, the XI/ON gateway for
EtherNet/IP supports the below vendor specific classes.
It is possible to gain read ( G = Get) and/or write ( S = Set) access to the attributes of classes
described in the following VSC-Vendor Specific Classes
Table 37:
VSC-Vendor
Specific Classes Class
Code
dec.
(hex.)
Name Description
100 (64h) Gateway class Contains data and settings concerning
the gateway and the XI/ON system as a
whole.
101 (65h) Terminal slot class Contains data concerning the base
modules
102 (66h) Process data class Contains process data
103 (67h) Power supply module class Describes the power supply modules
104 (68h) Digital input module class Describes the modules of the type
XN-#DI-… and XNE-#DI-…
105 (69h) Digital output module class Describes the modules of the type
XN-#DO-… and XNE-#DO-…
106 (6Ah) Analog input voltage module class Describes the modules of the type
XN-#AI-U(-10/0…+10VDC)
107 (6Bh) Analog output voltage module class Describes the modules of the type
XN-#AO-U(-10/0…+10VDC)
108 (6Ch) Analog input current module class Describes the modules of the type
XN-#AI-I(0/4…20MA)
109 (6Dh) Analog output current module class Describes the modules of the type
XN-#AO-I(0/4…20MA)
110 (6Eh) Analog input RTD module class Describes the modules of the type
XN-#AI-PT/NI-2/3
111 (6Fh) Analog input THERMO module class Describes the modules of the type
XN-#AI-THERMO-PI
112 (70h) Counter module class Describes the modules of the type
XN-1CNT-24VDC
113 (71h) reserved –
114 (72h) RS232 module class Describes the modules of the type
XN-1RS232
115 (73h) RS485/422 module class Describes the modules of the type
XN-1RS485/422