Eaton XN-GW Series, Руководство пользователя

Страница: 103 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
103
5.3.13 Analog input THERMO module class (VSC111)
This Class contains all information and parameters for analog input modules for thermo-
couples.
Class instance
Object instance
Note
Please refer to Chapter 5.3.1 Class instance of the VSC, Page 76, for the description
of the class instances for VSC.
Table 54:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description
100
(64h) Max object attri-
bute G USINT Contains the number of the last object attri-
bute to be implemented.
101
(65h) Module present G BOOL 0 = module missing, base module without
electronic module.
1 = module is plugged
102
(66h) Terminal slot
number G USINT The slot number of the base module
belonging to the module (base module to
the right of the gateway = No. 1).
Corresponds to the respective Instance
Number within the TERMINAL SLOT
CLASS.
103
(67h) Module ID G DWORD Contains the module ID.
104
(68h) Module order
number G UDINT Contains the ident number of the module.
105
(69h) Module order
name G SHORT
STRING Contains the name of the module, for
example, "XN-2AI-THERMO-PI".
106
(6Ah) Module revision G USINT Contains the revision number of the module
firmware.
107
(6Bh) Module type ID G ENUM
USINT Describes the module type: see attribute
107 (6Bh) on page 86
108
(6Ch) Module
command inter-
face G/S ARRAY The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh Module response
interface G ARRAY Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence