Eaton XN-GW Series, Руководство пользователя

Страница: 144 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
144
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
107
(6Bh) Module type ID G ENUM
USINT Describes the module type:
see attribute 107 (6Bh) on page 86
108
(6Ch) Module
command
interface G/S ARRAY The control interface of the module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh) Module response
interface G ARRAY Response interface of the module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh) Module
registered Index G ENUM
USINT Contains the index numbers specified in all
the module lists.
111
(6Fh) Number of
supported input
channels G USINT Shows the number of input channels
supported by this module instance.
112
(70h) Number of
supported output
channels G USINT Shows the number of output channels
supported by this module instance.
SWIRE data
113
(71h) Input1_DWORD G DWORD Contains the first 4 bytes of the process
input data.
114
(72h) Input2_DWORD G DWORD Contains the last 4 bytes of the process
input data
115
(73h) Output1_DWOR
D G DWORD Contains the first 4 bytes of the process
output data.
116
(74h) Output2_DWOR
D G DWORD Contains the last 4 bytes of the process
output data
117
(75h) Diag_common_
error G WORD One bit per SWIRE slave shows if diagnos-
tics messages are present or not.
Slave 1 belongs to bit 0,
slave 2 to bit 1 etc.
0: No diagnostics message present.
1: One/several diagnostics messages
present.
Table 61:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description