Eaton XN-GW Series, Руководство пользователя

Страница: 93 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
93
5.3.9 Analog output voltage module class (VSC107)
This Class contains all information and parameters for analog output modules (voltage).
Class instance
Object instance
Note
Please refer to Chapter 5.3.1 Class instance of the VSC, Page 76, for the description
of the class instances for VSC.
Table 50:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description
100
(64h) Max object attri-
bute G USINT Contains the number of the last object attri-
bute to be implemented.
101
(65h) Module present G BOOL 0 = module missing, base module without
electronic module.
1 = module is plugged
102
(66h) Terminal slot
number G USINT The slot number of the base module
belonging to the module (base module to
the right of the gateway = No. 1).
Corresponds to the respective Instance
Number within the TERMINAL SLOT
CLASS.
103
(67h) Module ID G DWORD Contains the module ID.
104
(68h) Module order
number G UDINT Contains the ident number of the module.
105
(69h) Module order
name G SHORT
STRING Contains the name of the module, for
example, "XN-2AO-U(-10/0…+10VDC)".
106
(6Ah) Module revision G USINT Contains the revision number of the module
firmware.
107
(6Bh) Module type ID G ENUM
USINT Describes the module type: see attribute
107 (6Bh) on page 86
108
(6Ch) Module
command inter-
face G/S ARRAY The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh Module response
interface G ARRAY Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh) Module regis-
tered index G ENUM
USINT Contains the index numbers specified in all
the module lists.