Eaton XN-GW Series, Руководство пользователя

Страница: 141 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
141
105
(69h) Module order
name G SHORT
STRING Contains the name of the module, for
example, "XN-4AI-U/I".
106
(6Ah) Module revision G USINT Contains the revision number of the module
firmware.
107
(6Bh) Module type ID G ENUM
USINT Describes the module type: see attribute
107 (6Bh) on page 86
108
(6Ch) Module
command inter-
face G/S ARRAY The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh) Module response
interface G ARRAY Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh) Module regis-
tered
index G ENUM
USINT Contains the index numbers specified in all
the module lists.
111
(6Fh) Module input
channel count G USINT Contains the number of input channels
supported by the module.
112
(70h) Module output
channel count G USINT Contains the number of output channels
supported by the module.
Input data
113
(71h)
to
128
(80h) Module input 1
to
Module input 16 G UINT Input data of the module (according to chan-
nels).
Output data
129
(81h)
to
144
(8Fh) Module output_1
to
Module
output_16 G DWORD Output data of the module (according to
channels).
Diagnosis data
145
(90h) Range error G WORD Indicates an over- or undercurrent of 1 % of
the set current/voltage range; whereby,
undercurrents can only be recognized with
those modules that have a set current range
of 4 to 20 mA.
146
(91h) Open circuit error G WORD Indicates an open circuit in the signal line for
the operating mode
Table 60:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description