Eaton XN-GW Series, Руководство пользователя

Страница: 86 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
86
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
107
(6Bh) Module type ID G ENUM
USINT Describes the module type:
– 0x00: type of module unknown (default)
– 0x01: digital module
– 0x11: analog voltage mod.
– 0x12: analog current mod.
– 0x13: analog RTD mod.
– 0x14: analog THERMO mod.
– 0x1F: analog volt./curr. mod.
– 0x22: counter/incr. encoder 32bit
– 0x28: SSI interface
– 0x31: starter, mechanical
– 0x32: starter, electronical
– 0x41: RS232 mod.
– 0x42: RS485/RS422 mod.
– etc.
108
(6Ch) Module
command inter-
face G/S ARRAY The control interface of the XI/ON module.
ARRAY OF:
BYTE: Control byte sequence
109
(6Dh Module response
interface G ARRAY Response interface of the XI/ON module.
ARRAY OF:
BYTE: Response byte sequence
110
(6Eh) Diag size G UINT Indicates the number of diagnostic bits of
the module.
111
(6Fh) Diag G WORD Contains the diagnostic information of the
module.
WORD:
Bit for bit assignment according to module
specification.
112
(70h) Module regis-
tered index G ENUM
USINT Contains the index numbers specified in all
the module lists.
Table 46:
Object instance Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description