![background image](http://html1.mh-extra.com/html/eaton/edr-5000/edr-5000_installation-operation-and-maintenance-manual_3976398234.webp)
EDR-5000
IM02602007E
Recorders
Waveform Recorder
Waveform rec
The waveform recorder works with 32 samples per cycle. It can be started by one of eight start events (selection from
the »Assignment list«/OR-Logic).
The waveform record contains the measuring values including the pre-trigger time. By means of PowerPort-E
/Quality
Manager
(option), the oscillographic curves of the analog (current, voltage) and digital channels/traces can be shown
and evaluated in a graphical form.
The
waveform
recorder has a storage capacity of 120 s (duration). The amount of records depends on the file size of
each record.
The
waveform
recorder can be configured in the
»Device Parameter/Recorder/Waveform rec« menu.
Determine the maximum recording time to register a
waveform
event. The maximum total length of a recording is 10 s
(including
pre-trigger and post-trigger time)
.
To trigger the
waveform
recorder, up to eight signals can be selected from the »Assignment list«. The trigger events
are
OR-linked. If a
waveform
record is written, a new
waveform
record cannot be triggered until all trigger signals,
which have triggered the previous
waveform
record, are gone.
Recording is only done for the time the assigned event exists (event controlled), plus the time for the pre- and post-
trigger, but not longer than 10 s. The time for the pre- and post-trigger is to be entered as percent of the maximum file
size.
The post-trigger time will be up to the "Post-trigger time" depending on the duration of the
trigger signal. The post-trigger will be the remaining time of the "Max file size" but, at
maximum, the "Post-trigger time".
Example
The
waveform
recorder is started by the general activation facility. After the fault has been cleared (plus follow-up
time), the recording process is stopped (but after 10 s at the latest).
The parameter
»Auto Delete« defines how the device will react if a location to which to save the
waveform
record is not
available. In case
»Auto Delete« is »Active«, the first recorded
waveform
will be overwritten according to the FIFO
principle. If the parameter is set to
»Inactive«, recording of the
waveform
events will be stopped until the storage
location is manually released.
www.eaton.com
234
Содержание EDR-5000
Страница 63: ...EDR 5000 IM02602007E Ethernet RJ45 Terminal Marking www eaton com 63 1 8 TxD TxD RxD N C N C RxD N C N C...
Страница 253: ...EDR 5000 IM02602007E Fault Recorder Module Signals Signal Description Res record Signal Delete Record www eaton com 253...
Страница 887: ...EDR 5000 IM02602007E Real Time Clock Running Reserve of the Real Time Clock 1 year min www eaton com 887...