![background image](http://html1.mh-extra.com/html/eaton/edr-5000/edr-5000_installation-operation-and-maintenance-manual_3976398950.webp)
EDR-5000
IM02602007E
Name
Description
Bkr.Pos CLOSE
Signal: Breaker is in CLOSE-Position
Bkr.Pos OPEN
Signal: Breaker is in OPEN-Position
Bkr.Pos Indeterm
Signal: Breaker is in Indeterminate Position
Bkr.Pos Disturb
Signal: Breaker Disturbed - Undefined Breaker Position. The feed-back signals (Position Indicators) contradict
themselves. After expiring of a supervision timer this signal becomes true.
Bkr.Ready
Signal: Breaker is ready for operation.
Bkr.Interl CLOSE
Signal: One or more IL_Close inputs are active.
Bkr.Interl OPEN
Signal: One or more IL_Open inputs are active.
Bkr.CES succesf
Signal: Command Execution Supervision: Switching command executed successfully.
Bkr.CES Disturbed
Signal: Command Execution Supervision: Switching Command unsuccessful. Switchgear in disturbed
position.
Bkr.CES Fail TripCmd
Signal: Command Execution Supervision: Command execution failed because trip command is pending.
Bkr.CES SwitchgDir
Signal: Command Execution Supervision respectivly Switching Direction Control: This signal becomes true, if
a switch command is issued even though the switchgear is already in the requested position. Example: A
switchgear that is already OPEN should be switched OPEN again (doubly). The same applies to CLOSE
commands.
Bkr.CES CLOSE d OPEN
Signal: Command Execution Supervision: CLOSE Command during a pending OPEN Command.
Bkr.CES SG not ready
Signal: Command Execution Supervision: Switchgear not ready
Bkr.CES Field Interl
Signal: Command Execution Supervision: Switching Command not executed because of field interlocking.
Bkr.CES SyncTimeout
Signal: Command Execution Supervision: Switching Command not executed. No Synchronization signal while
t-sync was running.
Bkr.CES SG removed
Signal: Command Execution Supervision: Switching Command unsuccessful, Switchgear removed.
Bkr.Prot CLOSE
Signal: CLOSE command issued by the Prot module
Bkr.TripCmd
Signal: Trip Command
Bkr.Ack TripCmd
Signal: Acknowledge Trip Command
Bkr.Bwear Slow Breaker
Signal: Slow Breaker Alarm
Bkr.Res Bwear Sl Breaker
Signal: Resetting the slow breaker alarm
Bkr.CLOSE Cmd
Signal: CLOSE command issued to the switchgear. Depending on the setting the signal may include the
CLOSE command of the Prot module.
Bkr.OPEN Cmd
Signal: OPEN command issued to the switchgear. Depending on the setting the signal may include the OPEN
command of the Prot module.
Bkr.CLOSE Cmd manual
Signal: CLOSE Cmd manual
Bkr.OPEN Cmd manual
Signal: OPEN Cmd manual
Bkr.Sync CLOSE request
Signal: Synchronous CLOSE request
Bkr.CinBkr-52a-I
Module Input State: Feed-back signal of the Bkr (52a)
Bkr.CinBkr-52b-I
Module Input State: Feed-back signal of the Bkr. (52b)
Bkr.Ready-I
Module Input State: Breaker Ready
Bkr.Sys-in-Sync-I
State of the module input: This signals has to become true within the synchronization time. If not, switching is
unsuccessful.
Bkr.Ack TripCmd-I
State of the module input: Acknowledgment Signal (only for automatic acknowledgment). Module input signal
www.eaton.com
950
Содержание EDR-5000
Страница 63: ...EDR 5000 IM02602007E Ethernet RJ45 Terminal Marking www eaton com 63 1 8 TxD TxD RxD N C N C RxD N C N C...
Страница 253: ...EDR 5000 IM02602007E Fault Recorder Module Signals Signal Description Res record Signal Delete Record www eaton com 253...
Страница 887: ...EDR 5000 IM02602007E Real Time Clock Running Reserve of the Real Time Clock 1 year min www eaton com 887...