![background image](http://html1.mh-extra.com/html/eaton/edr-5000/edr-5000_installation-operation-and-maintenance-manual_3976398445.webp)
EDR-5000
IM02602007E
Commissioning: Overcurrent Protection, directional [ANSI 50P/67P]
Object to be tested:
•
For each directional overcurrent element is to be measured: the total tripping time (recommendation) or alternatively
tripping delays and the dropout ratios; each time 3 x single-phase and 1 x three-phase.
Especially in Holmgreen connections, wiring errors can happen easily and
these are then detected safely. By measuring the total tripping time, it can be
ensured that the secondary wiring is OK (from the terminal on, up to the trip coil
of the Breaker).
Eaton recommends measuring the total tripping time instead of the tripping
delay. The tripping delay should be specified by the User. The total tripping
time is measured at the position signaling contact of the breaker (not at the
relay output contacts!).
Total tripping time
= tripping delay (please refer to the tolerances of the
protection
element
s)
+ breaker operating time (about 50 ms)
Please take the breaker operating times from the technical data specified in the
relevant documentation provided by the breaker manufacturer.
Necessary means
Synchronizable current and voltage sources
Optional: ampere meters
Timer
Procedure
Synchronize the 3-phase current and voltage sources with each other. Then simulate the tripping directions to be tested
by the angle between current and voltage.
Testing the threshold values
(3 x single-phase and 1 x three-phase)
Each time feed a current which is about 3-5% above the threshold value for activation/tripping. Check then the
threshold values.
Testing the total tripping delay
(recommendation)
Measure the total tripping times at the auxiliary contacts of the Brk (Brk tripping).
Testing the trip delay
(measured at the relay output)
Measure the tripping times at the relay output.
Testing the dropout ratio
Reduce the current to
97%
below the trip value and check the dropout ratio.
www.eaton.com
445
Содержание EDR-5000
Страница 63: ...EDR 5000 IM02602007E Ethernet RJ45 Terminal Marking www eaton com 63 1 8 TxD TxD RxD N C N C RxD N C N C...
Страница 253: ...EDR 5000 IM02602007E Fault Recorder Module Signals Signal Description Res record Signal Delete Record www eaton com 253...
Страница 887: ...EDR 5000 IM02602007E Real Time Clock Running Reserve of the Real Time Clock 1 year min www eaton com 887...