DURKOPP ADLER 911-211 Скачать руководство пользователя страница 41

Страница: 41 / 200

Machine head

Service Instructions 911-211 - 02.0 - 10/2016

4.4.4 Setting the needle guard

The needle guard prevents contact between needle and hook tip.

Order

First, check the following settings:

• Loop stroke position (



p. 34

)

• Hook side clearance (



p. 38

)

• Needle bar height (



p. 36

)

• A straight and undamaged needle has to be inserted (



Operating

Instructions

)

Proper setting

Machine locked in place at position 1 (



p. 28



The needle guard pushes the needle away just enough so that it is
not touched by the hook tip.

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Switch off the machine before you check and set
the needle guard.

NOTICE

Property damage may occur!

There is a risk of machine damage, needle breakage or damage to
the thread if the distance between needle groove and hook tip is
incorrect.

Check and, if necessary, readjust the distance to the hook tip after
inserting a new needle with a different size.

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 41 / 200

Результаты поиска

Содержание 911-211

Отзывы: