DURKOPP ADLER 911-211 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 200

DURKOPP ADLER 911-211 Скачать руководство пользователя страница 29

Working basis

Service Instructions 911-211 - 02.0 - 10/2016

28

3.6

Locking the machine in place

For some settings, the machine must be locked in place. To do this, the
locking peg from the accessory pack is inserted into a slot on the arm shaft
crank, blocking the arm shaft.

Fig. 17: Lock the machine in place (1)

There are 2 securing positions:

•

Position 1:

Loop stroke position

• 5 mm end in the large slot

• Setting the loop stroke and needle bar height

•

Position 2:

Needle at top dead center

• 3 mm end in the small slot

• Checking the top dead center of the needle bar

Fig. 18: Lock the machine in place (2)

Locking the machine in place

1.

Insert the locking peg (6) with the appropriate end into the slot (5) of
the arm shaft crank (4).

(1)

- Locking peg

(2)

- Large arresting groove

(3)

- Small arresting groove

(4)

- Arm shaft crank

(1)

- Locking peg

(2)

- Large arresting groove

①

②

③

④

①

②

«
...
27
28
29
30
31
...
»

Содержание 911-211









































































































































































































Отзывы:

Нет отзывов