manualshive.com logo in svg

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 120 / 200

Поделиться
Скачать
DURKOPP ADLER 911-211 Скачать руководство пользователя страница 120

Programming

119

Service Instructions 911-211 - 02.0 - 10/2016

6.17.1 Changing the contour of a seam program

To edit an existing seam program:

1.

Tap the menu items 

Bearbeiten (Edit)

 > 

Nahtprogramm 

(Seam program)

 > 

Konturanpassing (Adjust 

Contour)

.

The contour adjustment window appears:

Fig. 100: Changing the contour of a seam program (1)

2.

Use the arrow buttons to move the cursor (1) to the position on the 
contour that is to be changed.

Information

You can also use the slider control on the scale (2) to select the stitching 
area you wish to change:
The first stitch of the seam is at the top and the last stitch is at the bottom.

3.

Tap the 

Go To

 button.

The selected contour region is displayed in detail.
The stitching point (2) to be modified is marked in red.

NOTICE

Property damage may occur!

If you have entered contour points that lie outside the sewing field, 
the movement of the clamps during sewing can cause damage to the 
machine or the sewing material.

Always perform a contour test after creating or editing a contour to 
ensure that the entire contour lies within the permissible sewing field.

(1)

- Cursor

(2)

- Scale: First to last stitch

①

②

Содержание 911-211









































































































































































































Отзывы:

Нет отзывов