manualshive.com logo in svg

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 66 / 200

Поделиться
Скачать
DURKOPP ADLER 911-211 Скачать руководство пользователя страница 66

Machine head 

65

Service Instructions 911-211 - 02.0 - 10/2016

2.

Loosen the screw (1).

3.

Position the thread-pulling knife (3) such that the arrow mark is exactly 
next to the tip of the counter blade (2).

4.

Turn the hook thread clamp (5) such that it rests against the thread-
pulling knife (3). 

5.

Turn the counter blade (2) such that it rests against the thread-pulling 
knife (3).

6.

Tighten the screw (1).

Important

Check the position of the cutters, since the counter blade can easily be-
come warped when the screw is being tightened.

4.8.4 Setting point in time for cutting

Proper setting

The threads are cut when the thread lever is at the top dead center.

Cover

• Swivel up the machine head (

 

p. 15

)

• Bobbin flap (

 

p. 21

)

Fig. 49: Setting point in time for cutting

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Switch off the machine before you check and set 
the point in time for cutting.

(1)

- Roller 

(2)

- Clamping ring

(3)

- Control cam

(4)

- Threaded pins

(5)

- Counter blade

(6)

- Thread-pulling knife

6

1

2

3

5

4

Содержание 911-211









































































































































































































Отзывы:

Нет отзывов