DURKOPP ADLER 911-211 Скачать руководство пользователя страница 32

Страница: 32 / 200

Machine head

Service Instructions 911-211 - 02.0 - 10/2016

4.2

Positioning the toothed belt wheels

The two toothed belt wheels must be positioned relative to each other
such that the toothed belt can run correctly.

Order

• Always check the position of the other toothed belt wheel after making a

change on either of the toothed belt wheels.

4.2.1 Setting the upper toothed belt wheel

Proper setting

The 2 threaded pins for the upper toothed belt wheel are seated flush on
the flat.

Cover

• Arm cover

Fig. 21: Setting the upper toothed belt wheel

WARNING

Risk of injury from moving parts!

Crushing possible.

Switch the machine off before you check and set
the upper toothed belt wheel.

(1)

- Threaded pins

(2)

- Flat of arm shaft

(3)

- Upper toothed belt wheel

(4)

- Toothed belt

①

②

③

④

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 32 / 200

Результаты поиска

Содержание 911-211

Отзывы: