DURKOPP ADLER 911-211 Скачать руководство пользователя страница 15

Страница: 15 / 200

Working basis

Service Instructions 911-211 - 02.0 - 10/2016

Working basis

3.1

Order of the settings

The settings for the machine are interdependent.

Always comply with the order of individual setting steps as specified.

It is absolutely essential that you follow all notices regarding prerequisites

and subsequent settings that are marked with

in the margin.

3.2

Cable routing

To lay the cables:

Lay any excess cabling neatly in proper cable snakes.

Bind together the cable loops with cable ties.

Tie loops wherever possible to fixed parts.

Important

The cables must be secured firmly!

Cut off any overlapping cable ties.

NOTICE

Property damage may occur!

Machine damage from incorrect order.

It is essential to follow the working order specified in these
instructions.

NOTICE

Machine damage and malfunctions can be caused by laying the
cables incorrectly!

Excess cables can impair the functioning of moving machine parts.
This impairs the sewing function and can result in damage.

Lay excess cable as described above.

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 15 / 200

Результаты поиска

Содержание 911-211

Отзывы: