DURKOPP ADLER 911-211 Скачать руководство пользователя страница 150

Страница: 150 / 200

Maintenance

149

Service Instructions 911-211 - 02.0 - 10/2016

8.2

Lubricating

The machine is equipped with a central oil-wick lubrication system. The
bearings are supplied from the oil reservoir.

For topping off the oil reservoir, use only lubricating oil

DA 10

or oil of

equivalent quality with the following specifications:

• Viscosity at 40 °C: 10 mm²/s

• Flash point: 150 °C

You can order the lubricating oil from our sales offices using the following
part numbers:

CAUTION

Risk of injury from contact with oil!

Oil can cause a rash if it comes into contact with
skin.

Avoid skin contact with oil.

If oil has come into contact with your skin, wash the
affected areas thoroughly.

NOTICE

Property damage from incorrect oil!

Incorrect oil types can result in damage to the machine.

Only use oil that complies with the data in the instructions.

CAUTION

Risk of environmental damage from oil!

Oil is a pollutant and must not enter the sewage
system or the soil.

Carefully collect up used oil.

Dispose of used oil and oily machine parts in
accordance with national regulations.

Container

Part no.

250 ml

9047 000011

1 l

9047 000012

2 l

9047 000013

5 l

9047 000014

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 150 / 200

Результаты поиска

Содержание 911-211

Отзывы: