DURKOPP ADLER 911-211 Скачать руководство пользователя страница 99

Страница: 99 / 200

Programming

Service Instructions 911-211 - 02.0 - 10/2016

6.4.2 Closing windows

A number of different buttons can be used for closing the currently open
window.

6.4.3 Display principles

Fig. 79: Display principles

The currently activated or selected element is highlighted with a dark
background (2).

Buttons that are not used in the current context are grayed-out (1).

Button

Meaning

At the upper right in the title bar of all windows:



The program jumps back by one navigation level.

OK
CR

In windows with data entry or selection fields:



The window is closed, and the entered

or selected data is adopted.

DEL
Cancel
Cancel

In windows with data entry or selection fields:



The window is closed, and the entered

or selected data is discarded.

(1)

- Grayed-out: Deactivated element

(2)

- Dark background: Activated element

②

①

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 99 / 200

Результаты поиска

Содержание 911-211

Отзывы: